Ameritron RCS-8V/RCS-10V Remote Coax Switch
Represented by Cubex Quads


 

 

The RCS-8V 5 -Pos. Remote Antenna Switch

Replace 5 coax feedlines with one!
Ameritron's Remote Coax Switch lets your remotely switch up to five separate antennas -- so you can replace five coax feedlines with a single coax.
Eliminate a tangle of troublesome coax and have a simple and neat installation -- with just a single coax feedline.
The RCS-8V consists of two units -- the weatherproof switching box that mounts on your tower or mast and the control unit that's placed at your operating station.
VSWR is less than 1.2 from DC to 250 MHz and slightly higher at 450 MHz with less than 0.1 dB loss at 150 MHz -- if you operate HF to VHF/UHF. This RCS-8V is for you.
It handles 5 KW below 30 MHz and 1 KW at 150 MHz. You can ground unused positions or leave them open.
The indoor control unit is all metal to prevent RFI and TVI. It also has LEDs to indicate the antenna you've selected.
A Lexan scratch proof front panel has a markable surface for labeling your antennas.
The RCS-8V operates from 120 VAC power source or RCS-8VX for 220/240 Vac. Uses any 6 conductor control line (not supplied) and allows safe operation with 14 volts control voltage.


 

The RCS-10V 8 -Pos. Remote Antenna Switch


 

 

This Remote Coax Switch lets you remotely switch up to eight HF antennas -- so you can replace 8 coax feedlines with a single coax. Eliminate a tangle of troublesome coax and have a simple and near installation -- with just a single coax feedline!

The RCS-10 consists of two units -- the weatherproof switching b ox that mounts on your tower or mast and the control unit that's placed at your operating station.

Outdoor Unit Features

Control Box Features

 

 


BACK